Industrial concrete solutions

Industrial Concrete Floor Repair for Warehouses and Factories

Spray Pave Melbourne provides industrial concrete floor repair and coatings for warehouses, factories, workshops, loading docks and car parks across Melbourne. We repair, prepare and coat the floor you already have, and we plan the work around your shifts, weekends and shutdowns so your site keeps running.

  • 15+ years experience
  • 1,000+ projects completed
  • Accredited applicators for Dulux Avista, MPS Paving Systems and Urban Floors

Epoxy-coated workshop or industrial garage floor resistant to oil and heat

Industrial Floors Need to Handle More Than Everyday Wear

A damaged industrial floor costs more than its looks. Broken joints jolt forklifts and loads. Cracks and potholes become trip hazards. Dusting concrete settles on stock and machinery. Worn coatings can fail a safety or food audit.

Breaking out and pouring a new slab means closing the area for weeks. In most cases that is not needed. If the slab is structurally sound, we repair the damage and apply a coating system chosen for your loads, spills and cleaning routine.

Equipment damage
Broken joints and potholes wear forklift wheels and bearings.

Safety risk
Uneven or slippery floors are a trip and slip hazard for staff.

Dust and hygiene
Bare, dusting concrete contaminates stock and is hard to clean.

Downtime
Small damage left alone becomes a bigger, longer repair.

What usually causes the damage

  • Joint impact. Hard forklift wheels hit the edges of saw-cut and construction joints thousands of times a day, and the edges break away.
  • Abrasion. Pallets, steel wheels and grit wear the top layer of bare concrete until it starts to dust.
  • Chemicals and oils. Spills soak into unsealed concrete and weaken the surface over time.
  • Water. Wash-down water and rain at dock doors get into cracks and make them grow.
  • Coating failure. A coating laid over poorly prepared concrete lifts and peels along traffic paths.

Knowing the cause matters, because the repair has to stop it happening again, not just cover it.

Industrial Floor Repair at a Glance

The short answer for facility and operations managers.

Topic Answer
What we doRepair, prepare and coat existing industrial concrete floors. We do not pour new slabs
SitesWarehouses, factories, workshops, loading docks and underground car parks
SystemsEpoxy, polyurethane and concrete repair systems, plus asphalt sealing for external areas
Built forForklifts, pallet movements, racking loads, impact and spills
SchedulingZone by zone, with nights, weekends and shutdowns available
Safety paperworkPublic liability insurance, White Card crews and SWMS on request
PriceWritten scope and quote after a free site inspection
WhereIndustrial sites across Melbourne

Industrial Floor Problems We Fix

Match what you see on your floor to the repair that usually fixes it. We confirm the right system at the site inspection.

What you see Why it matters Usual fix
Cracked or spalled jointsJolts forklifts and spreads under trafficCrack repair and joint sealing
Cracks across the slabLets in water and spills, and keeps growingTargeted crack repair
Dusting bare concreteDust settles on stock and machineryIndustrial floor coating
Worn or peeling coatingLooks poor and is hard to cleanPrepare and recoat
Oil and chemical stainingCan attack the surface and spreadChemical-resistant coating
Slippery wet or wash-down areasA slip risk for staffSlip-resistant coating options
Damaged loading dockTakes the heaviest truck and forklift trafficLoading dock restoration
Worn car park or loading bay asphaltBreaks down in sun and rainAsphalt sealing and coating

Check Your Floor Before You Call

A ten-minute walk around the site tells you most of what we will look for. Take photos as you go.

  • Walk the forklift routes. Note joints that are chipped, broken or that forklifts bump over.
  • Look for cracks that have widened or have edges breaking away.
  • Wipe a hand across bare concrete. A powdery residue means the surface is dusting.
  • Check coated areas for peeling, bubbles or patches worn through along traffic paths.
  • Look at wet and wash-down zones after cleaning. Note pooling water and slippery spots.
  • Check the loading dock edge and the area in front of each door for broken concrete.

Send the photos with the quote form. They help us plan the inspection and give you early advice.

Industrial Flooring Services

Most industrial jobs combine two or more of these. Repairs always come before any coating, so the new surface bonds and lasts.

Crack repair and joint sealing

We repair cracks and failed joints before any coating goes on. This stops further breakdown and gives forklifts a smooth path.

Epoxy flooring

Seamless epoxy in light grey, off-white, safety yellow, red or custom colours. Colours can mark walkways, work zones and hazard areas.

Industrial floor coating

Heavy-duty coatings that extend floor life, improve safety and make cleaning easier. Chemical and slip-resistant options are available.

Asphalt sealing and coating

UV-stable, slip-resistant coatings for external car parks and loading bays, made for Melbourne weather.

Which Floor System Suits Your Area?

Different parts of one site often need different systems. This is where we usually start. The final choice depends on your loads, chemicals and cleaning method. Each service page has the full details of its system.

Warehouse aisles and racking

Epoxy coating

A hard, seamless surface for forklift routes, with colour zoning for walkways.

Workshops and maintenance bays

Chemical-resistant epoxy

Resists oils and fluids and wipes clean after spills.

Wash-down and food areas

Chemical and slip-resistant system

Food-grade options for wet areas that are cleaned often.

Loading docks

Repair, then heavy-duty coating

Damaged edges and surfaces repaired first, then coated for truck and pallet traffic.

Underground car parks

Crack repair and heavy-duty flooring

Targeted repairs that stabilise the slab under vehicle loads.

External car parks and bays

Asphalt sealing and coating

UV-stable, slip-resistant protection for outdoor surfaces.

Industrial Projects Delivered Across Melbourne

Three types of industrial work we complete often. Each one repairs what is damaged and keeps the concrete that is still sound.

Slip-resistant coated basement floor designed to reduce moisture and dust
Crack repair

Warehouse and underground car park crack repair

Cracks in warehouse and underground car park areas were repaired in targeted sections, so the slab did not need replacing.

  • Repairs focused on the damaged sections only
  • Thorough preparation for bonding and vehicle loads
  • Stabilised to slow further deterioration
Heavy-duty coating on a factory floor
Floor coating

Automotive workshop and factory floor coatings

Coating systems were chosen for vehicle traffic, machinery and spills, giving a seamless surface that is easier to keep clean.

  • System matched to traffic and machinery
  • Seamless finish that is easier to clean
  • Careful preparation for wear and spills
A before-and-after comparison of a damaged concrete loading dock repaired with a smooth, clean finish beneath a red roller door.
Restoration

Loading dock restoration

A worn, busy loading dock was restored in stages. Sound concrete was kept and only the damaged areas were repaired.

  • Staged so the dock stayed in use
  • Targeted repairs that keep sound concrete
  • Surface built for trucks, forklifts and pallets

Why Facility Managers Choose Spray Pave Melbourne

Engineered for the load

Systems chosen for forklifts, point loads, racking and impact.

Repairs and preparation first

Grinding, crack repair and joint repair before any coating, so it bonds and lasts.

Slip-resistant options

Finishes that help you meet your OH&S obligations.

Zones reopen sooner

Fast-curing systems where they suit the job, so each area is back in use quickly.

Safety paperwork ready

Insurance, White Card crews and SWMS on request.

15+ years, 1,000+ projects

Experience across industrial, commercial, council and school sites.

How an Industrial Floor Project Works

Step 1

Site inspection

We inspect the slab, joints, cracks and any existing coating at no cost, and ask about your loads and chemicals.

Step 2

Written scope and quote

You receive a scope that lists repairs, the coating system and the areas covered, with a clear price.

Step 3

Safety documents

We supply insurance details and SWMS, and complete your site induction before work starts.

Step 4

Staging plan

We split the floor into zones and book each one around shifts, nights, weekends or a shutdown.

Step 5

Repair and coat

Each zone is ground, repaired and coated. Finished zones are barricaded while they cure.

Step 6

Handover

We confirm when each zone can take foot and forklift traffic and explain how to clean the new floor.

What We Need From Your Site

Sorting these early keeps the program on time. We confirm the list in the staging plan.

  • Clear stock, pallets and loose equipment from each zone before its booked time.
  • Tell us about forklift routes, racking and any machinery that cannot move.
  • Give us access to power and water, and a place to store materials.
  • Share your site rules, induction process and permit requirements.
  • Let staff know which zones are closed and for how long.

Repair and Coat, or Replace the Slab?

For an operating site, downtime usually decides it. Read more in concrete resurfacing vs concrete replacement.

Repair and coat Slab replacement
What happensDamaged areas are repaired, then the floor is prepared and coatedThe old slab is broken out and new concrete is poured
DowntimeStaged in zones, often around shifts or weekendsThe area is closed for demolition, pouring and curing
DisruptionLow. No demolition or heavy waste removalHigh. Noise, dust, trucks and skip bins
CostUsually lower, with no demolition or new pourUsually higher
Best forSound slabs with surface damage, cracks or failed coatingsSlabs that have sunk, heaved or broken up

Questions to Ask Any Industrial Flooring Contractor

These five questions separate a floor that lasts from one that peels in a year. Here is how we answer them.

Ask the contractor How we answer
Will you repair cracks and joints before coating?Yes, always. A coating over broken joints fails at the joints first.
How will you prepare the surface?By grinding or other mechanical preparation, chosen for the floor, so the coating bonds properly.
Why this system for our floor?We match the system to your loads, chemicals and cleaning method, and explain the choice in the scope.
When can we use each area again?We give foot and forklift traffic times in the quote and confirm them for each zone at handover.
What safety paperwork do you provide?Insurance details and SWMS on request, White Card crews, and we complete your site induction.

Trusted by Builders, Councils and Brands You Know

Some of the brands and councils we have worked for.

★★★★★ 4.9 out of 5 from 33 Google reviews

Coles logo
Hanson logo
McDonald’s logo
Dulux logo
Australia Post logo
City of Casey logo

Industrial Flooring FAQs

Can you coat our industrial floor without shutting down our operation?

Usually, yes. We split the floor into zones and work around your shifts, nights, weekends or a planned shutdown. Only the zone being coated is closed, and it reopens once it has cured.

Will the floor handle forklifts and heavy traffic?

Yes, when the system is chosen for the load. We match the coating to your forklifts, pallet movements, racking and impact, and repair cracks and joints first so the surface is sound underneath.

Do you offer chemical-resistant and food-grade options?

Yes. We offer chemical and spill-resistant systems for workshops and wash-down areas, and food-grade options for food handling areas. Tell us which chemicals and cleaning methods you use so we can choose the right system.

Can you repair cracked or damaged slabs rather than replace them?

Often, yes. If the slab is structurally sound, we repair the cracked and damaged sections and keep the rest. Slabs that have sunk, heaved or broken up need replacing, and we will tell you if that applies.

Can you mark out walkways and safety zones?

Yes. Epoxy is available in safety yellow, red and custom colours, so walkways, work zones and hazard areas can be coloured into the floor. We plan the layout with you before coating.

Can you provide insurance and safety documentation for our site?

Yes. We are fully insured, our crews hold White Cards, and we provide SWMS and other safety documents on request. We also complete your site induction before work starts.

How soon can forklifts use the floor after coating?

It depends on the system and the temperature on site. We give you clear times for foot traffic and forklift traffic in your quote, and confirm them for each zone at handover.

Do you pour new concrete slabs?

No. We repair, prepare and coat existing concrete floors. If a slab is too damaged to repair, we will tell you during the site inspection so you can plan a replacement.

What do you need from us to quote?

A few photos, the approximate floor area, what runs on the floor, any chemicals used, and when the area can be closed. We then inspect the site at no cost and send a written scope and quote.

How long does an industrial floor coating last?

It depends on the traffic, the chemicals and how well the floor was prepared. A well-prepared floor with the right system lasts far longer than a coating rolled over bare, dusty concrete. We explain the expected maintenance and when a recoat may be needed in your scope.

Ready to Talk About Your Driveway, Patio or Garage?

Send us a few photos or book a free site assessment. We will look at your concrete and explain your options in plain terms. You will get a no-obligation quote and a reply within one business day.

Other Sectors We Work In

The same crews, systems and safety standards, applied to other kinds of sites.

Commercial
Shops, offices and showrooms

View sector

Residential
Driveways, patios and garages

View sector

Local Government
Footpaths and public spaces

View sector

Education
School playgrounds and paths

View sector

Parks and Recreation
Courts, paths and park areas

View sector

We service industrial sites across Melbourne. See all service locations