Industrial Floors Need to Handle More Than Everyday Wear
A damaged industrial floor costs more than its looks. Broken joints jolt forklifts and loads. Cracks and potholes become trip hazards. Dusting concrete settles on stock and machinery. Worn coatings can fail a safety or food audit.
Breaking out and pouring a new slab means closing the area for weeks. In most cases that is not needed. If the slab is structurally sound, we repair the damage and apply a coating system chosen for your loads, spills and cleaning routine.
Equipment damage
Broken joints and potholes wear forklift wheels and bearings.
Safety risk
Uneven or slippery floors are a trip and slip hazard for staff.
Dust and hygiene
Bare, dusting concrete contaminates stock and is hard to clean.
Downtime
Small damage left alone becomes a bigger, longer repair.
What usually causes the damage
Knowing the cause matters, because the repair has to stop it happening again, not just cover it.
Industrial Floor Repair at a Glance
The short answer for facility and operations managers.
| Topic | Answer |
|---|---|
| What we do | Repair, prepare and coat existing industrial concrete floors. We do not pour new slabs |
| Sites | Warehouses, factories, workshops, loading docks and underground car parks |
| Systems | Epoxy, polyurethane and concrete repair systems, plus asphalt sealing for external areas |
| Built for | Forklifts, pallet movements, racking loads, impact and spills |
| Scheduling | Zone by zone, with nights, weekends and shutdowns available |
| Safety paperwork | Public liability insurance, White Card crews and SWMS on request |
| Price | Written scope and quote after a free site inspection |
| Where | Industrial sites across Melbourne |
Industrial Floor Problems We Fix
Match what you see on your floor to the repair that usually fixes it. We confirm the right system at the site inspection.
| What you see | Why it matters | Usual fix |
|---|---|---|
| Cracked or spalled joints | Jolts forklifts and spreads under traffic | Crack repair and joint sealing |
| Cracks across the slab | Lets in water and spills, and keeps growing | Targeted crack repair |
| Dusting bare concrete | Dust settles on stock and machinery | Industrial floor coating |
| Worn or peeling coating | Looks poor and is hard to clean | Prepare and recoat |
| Oil and chemical staining | Can attack the surface and spread | Chemical-resistant coating |
| Slippery wet or wash-down areas | A slip risk for staff | Slip-resistant coating options |
| Damaged loading dock | Takes the heaviest truck and forklift traffic | Loading dock restoration |
| Worn car park or loading bay asphalt | Breaks down in sun and rain | Asphalt sealing and coating |
Check Your Floor Before You Call
A ten-minute walk around the site tells you most of what we will look for. Take photos as you go.
Send the photos with the quote form. They help us plan the inspection and give you early advice.
Industrial Flooring Services
Most industrial jobs combine two or more of these. Repairs always come before any coating, so the new surface bonds and lasts.
Crack repair and joint sealing
We repair cracks and failed joints before any coating goes on. This stops further breakdown and gives forklifts a smooth path.
Epoxy flooring
Seamless epoxy in light grey, off-white, safety yellow, red or custom colours. Colours can mark walkways, work zones and hazard areas.
Industrial floor coating
Heavy-duty coatings that extend floor life, improve safety and make cleaning easier. Chemical and slip-resistant options are available.
Asphalt sealing and coating
UV-stable, slip-resistant coatings for external car parks and loading bays, made for Melbourne weather.
Which Floor System Suits Your Area?
Different parts of one site often need different systems. This is where we usually start. The final choice depends on your loads, chemicals and cleaning method. Each service page has the full details of its system.
Epoxy coating
A hard, seamless surface for forklift routes, with colour zoning for walkways.
Chemical-resistant epoxy
Resists oils and fluids and wipes clean after spills.
Chemical and slip-resistant system
Food-grade options for wet areas that are cleaned often.
Repair, then heavy-duty coating
Damaged edges and surfaces repaired first, then coated for truck and pallet traffic.
Crack repair and heavy-duty flooring
Targeted repairs that stabilise the slab under vehicle loads.
Asphalt sealing and coating
UV-stable, slip-resistant protection for outdoor surfaces.
Industrial Projects Delivered Across Melbourne
Three types of industrial work we complete often. Each one repairs what is damaged and keeps the concrete that is still sound.

Warehouse and underground car park crack repair
Cracks in warehouse and underground car park areas were repaired in targeted sections, so the slab did not need replacing.

Automotive workshop and factory floor coatings
Coating systems were chosen for vehicle traffic, machinery and spills, giving a seamless surface that is easier to keep clean.

Loading dock restoration
A worn, busy loading dock was restored in stages. Sound concrete was kept and only the damaged areas were repaired.
How an Industrial Floor Project Works
Site inspection
We inspect the slab, joints, cracks and any existing coating at no cost, and ask about your loads and chemicals.
Written scope and quote
You receive a scope that lists repairs, the coating system and the areas covered, with a clear price.
Safety documents
We supply insurance details and SWMS, and complete your site induction before work starts.
Staging plan
We split the floor into zones and book each one around shifts, nights, weekends or a shutdown.
Repair and coat
Each zone is ground, repaired and coated. Finished zones are barricaded while they cure.
Handover
We confirm when each zone can take foot and forklift traffic and explain how to clean the new floor.
What We Need From Your Site
Sorting these early keeps the program on time. We confirm the list in the staging plan.
Repair and Coat, or Replace the Slab?
For an operating site, downtime usually decides it. Read more in concrete resurfacing vs concrete replacement.
| Repair and coat | Slab replacement | |
|---|---|---|
| What happens | Damaged areas are repaired, then the floor is prepared and coated | The old slab is broken out and new concrete is poured |
| Downtime | Staged in zones, often around shifts or weekends | The area is closed for demolition, pouring and curing |
| Disruption | Low. No demolition or heavy waste removal | High. Noise, dust, trucks and skip bins |
| Cost | Usually lower, with no demolition or new pour | Usually higher |
| Best for | Sound slabs with surface damage, cracks or failed coatings | Slabs that have sunk, heaved or broken up |
Questions to Ask Any Industrial Flooring Contractor
These five questions separate a floor that lasts from one that peels in a year. Here is how we answer them.
| Ask the contractor | How we answer |
|---|---|
| Will you repair cracks and joints before coating? | Yes, always. A coating over broken joints fails at the joints first. |
| How will you prepare the surface? | By grinding or other mechanical preparation, chosen for the floor, so the coating bonds properly. |
| Why this system for our floor? | We match the system to your loads, chemicals and cleaning method, and explain the choice in the scope. |
| When can we use each area again? | We give foot and forklift traffic times in the quote and confirm them for each zone at handover. |
| What safety paperwork do you provide? | Insurance details and SWMS on request, White Card crews, and we complete your site induction. |
Trusted by Builders, Councils and Brands You Know
Some of the brands and councils we have worked for.
★★★★★ 4.9 out of 5 from 33 Google reviews
Need references? Ask us for contacts from similar sites.






Ready to Talk About Your Driveway, Patio or Garage?
Send us a few photos or book a free site assessment. We will look at your concrete and explain your options in plain terms. You will get a no-obligation quote and a reply within one business day.
Other Sectors We Work In
The same crews, systems and safety standards, applied to other kinds of sites.
Commercial
Shops, offices and showrooms
Residential
Driveways, patios and garages
Local Government
Footpaths and public spaces
Education
School playgrounds and paths
Parks and Recreation
Courts, paths and park areas
We service industrial sites across Melbourne. See all service locations
